Check Local Availability
check your local store, for in store pickup
Diy Cabinets & the toe kick
In every form of cabinetry the toe kick gets overlooked. All diy cabinets can facilitate a toe kick, as in a strong foundation builds the forgoing future. At the base of cabinetry sits the frame that supports the boxes they rest on, and most of these allow the front toe kick to be visible.
Unless, as the image here shows, the end box or only cabinet (such as a bathroom vanity) has a side panel that is notched for a finish toe kick panel.
If the conditions are such that 3 boxes fill a space between two walls, for instance, the toe kick may end up being 10′ or so and will fasten below at the face of the frame the 3 boxes sit upon. In this case a back ledger and several sub span joist of 3/4″ ply every 24″ can be applied to create the base frame. Standard dimensions are 2″ to 3″ recessed back and 4″ high for comfort and cleaning. As the layout enables every cabinet, so in a sense they will have equal support for a good solid install. Now the finish front toe kick can be installed to complete the base portion of the cabinets.