Check Local Availability
check your local store, for in store pickup
Archive for the ‘cabinet substrates’ Category
Diy Cabinets believe it!
A product of one’s own environment never held truer than the simple thought tract. With any diy cabinets the start will be in your mind. Can I do this? The answer is always in the desire, your biggest hurdle is the idea that you can’t! But in today’s world information or shall we say the right info @ the right time will get you through that next step. Believe that you can first and then go to any number of DIY sites and something will definitely click for you.
You will need a few essential tools of course, power tools such as a table saw is paramount. A small compressor and a pin nail gun will aide 100 X’s over but not necessary if you can use a hammer. 90% of cabinets are just plywood cut square to fabricate a box or cube, a face frame is the hardwood grid that attaches to the front of the box. A Kreg jig will be the cheapest and best bet to assemble the face frame. This little beauty helps you hide the screws that fasten the frame together. Add a little glue and you’ve got the pro’s strength and longevity. Slab doors with no detail ( recessed panels) for example just need the right hardware and now the doors are on, there are places out there folks that will custom build doors for you, that are super reasonable per expense. With out going on and on here, the point is you can do it yourself period, and with a little bit of assistance, before long you may even change your vocation before you can say “did you say add some crown moulding ?”
Installing Kitchen Cabinets
How installing kitchen cabinets with a 5/8″ ACX subtop. The subtop is the plywood surface that’s fastened to the top of the cabinet(s), so you can lay the counter top over and adhere to it. Most would say why not 3/4″ plywood. Because most fabricated counter top have a 3/4″ return bullnosed front edge. With a 5/8″ subtop, the front edge of the counter top IE marble/ granite/ some of your corian or cultured counter tops are fabricated for a 3/4″ return that’s not going to hide the front edge of the plywood.
Many installers want this plywood subtop to be primer sealed before install and some of the better fabricators will seal the underside of the counter as well. Some glues used are not recommended because the porosity of the stone’s suck’s up and into the material and stain’s or even eats away and corrodes it. Ask the supplier for any recommended adhesives before hand.