DIY Home Improvement

Tiling a floor area and adding spots can truly break up the monotony and make a huge statement. This beautiful accent gives a different illumination to the floor. So on, how to install tile floor with glass spots can be another simple process once you understand the plan of attack. When tile is purchased, typically in squares, each individual piece that goes down creates a larger square, IE four 4″ tiles ends up making an 8″ square. And if the glass spots are 2″ squares then placed in the center of the 8″ square (or middle of 4 surrounding tiles) the inside edge of this four group gets cut at a 45 degree angle to make the smaller glass tile center inside that square. Do a small mock-up and get the idea solid in your mind, be sure to use a corresponding color of thin set adhesive because of it’s transparency the glass tiles will show all that’s underneath.

1. rachel says:

   November 12, 2009 at 10:40 am

   Thanks for the info! If you wanna check out some more diy flooring tips, check this out!

   http://yovia.com/blogs/diyflooring/
2. Nina says:

   November 12, 2009 at 10:40 am

   Pretty useful tip that you have available, I also have some I would like to share with you as well over at yovia.com/blogs/diyflooring
3. Craig says:

   November 12, 2009 at 9:23 pm

   Thanks Rachel, will do on the check’in out!!
4. dfsebf says:

   October 10, 2010 at 10:07 pm

   F7OV5L btgcecxjehin, [url=http://lmrdfzgvwipf.com/]lmrdfzgvwipf[/url], [link=http://kjmethupasbn.com/]kjmethupasbn[/link], http://vyoqlfxcdlij.com/