Check Local Availability
check your local store, for in store pickup
check your local store, for in store pickup
check your local store, for in store pickup
In a crafts room we wanted to install electrical power to an area that was going to be used as a printing station and required a 15 amp 110v plug for this usage. The best and closest area to leg power from was above the ceiling in the attic storage. With an existing single gang box there we ran some 14/2 romex down the wall and into a cabinet side. This needed only 2 holes drilled and the side of the melamine cabinet wall cut for a low profile single gang retro plastic cut-in box.
Once the wall of the 3/4″ melamine was marked then the Fein Multi Masterassisted in the finish plunge cut, the romex pulled through the box and the electrical outlet box was mounted on the wall, 2 men 2 hours of labor and approx. $35.00 us in materials. Important to note here will be to consult your local building codes for do’s and don’ts.