Check Local Availability
check your local store, for in store pickup
check your local store, for in store pickup
check your local store, for in store pickup
Drawer sides made from prefinished melamine consist with a dado cut 1/4″ deep running the length of the drawer depth. Building a drawer pullout is simply a box, with a drawer front screwed to the drawer face and a drawer knob attached to the drawer face. A typical drawer bottom is 1/4″ white melamine cut on a table saw. 
Any cabinet can use some sort of box to pullout and fill with just about anything. The dimension can vary and prefinished drawer sides can be purchased up to 12″ deep for larger capacity. Hardwood drawer fronts and backs are considered mostly for the durability. Once the drawer box has been assembled with finished nails, gun or hand nails will suffice. The drawer slides can be mounted and installed inside the cabinet. All drawer slide hardware has adjustable slots or cams for fine tuning. You may now install the drawer faces and pull hardware.