DIY Home Improvement

Lets get creative and learn how to install replacement windows with a stool and apron on the inside, paint or stain grade diy window treatments that say “OH YEA” that is how we roll. After the windows in place you will have removed any existing treatment. Pick the moulding you’ll be using and some 3/4″ flat stock to cut and install for the stool, this little decorative shelve notches around the finish wall and goes beyond the casings, as well as hangs into the room about an inch past the front lower moulding. This is known as the apron, the stool separates the casing from the apron and sets flat on top of the stool. Take note to measure accurate and see where and what’s to take place. With the new moulding, cut some small tester pieces and mark the layouts so you can facilitate there spots. A miter saw and table saw will be of great help but a handsaw and a good angle square can do this as well, diy your new replacement windows before all the guest show this holiday season, and show off all you want…..good job again!!